PC Building Guides
How to Plan a 1440p Gaming PC in 2026 Without Overspending
A practical way to divide your budget, choose the right CPU and GPU tier, and avoid paying for parts that don't improve your games.
For a 1440p gaming PC, put most of your money into the graphics card and pair it with a midrange CPU, unless the games you play give you a reason to spend more on the processor (e.g., competitive shooters). Budget for the whole system before you buy anything, including the motherboard, RAM, storage, case, cooler, and power supply. That matters more than usual right now, because graphics cards, RAM, and SSDs all cost far more than they did a year ago.
Start with your resolution and a budget
What you play decides where your money should go. Counter-Strike 2 on a 240Hz monitor calls for a different build than single-player games at around 60 FPS, so figure out which games you want running at high frame rates and which ones you'd rather play with the settings turned up.
Your monitor's refresh rate is the most frames per second it can display, so treat it as a ceiling instead of a target. A 165Hz monitor can show up to 165 FPS, but you don't have to hit that in everything you play.
Resolution matters too. In this guide, 1440p means 2560 × 1440. A 3440 × 1440 ultrawide gives the graphics card about a third more pixels to render, so look for benchmarks at that resolution if that's the monitor you have.
Then write your target down in one sentence, something like: "Single-player games at 1440p on High, ray tracing off, and no more than $1,500 for the PC." It's much easier to judge whether a part is worth the extra money when you know what it has to do. We'll come back to that $1,500 at the end, because current prices make it a useful test case.
If that budget also has to cover a monitor, keyboard, mouse, or a Windows license, take that money out first, along with tax and shipping. What's left is your spending limit for the parts inside the PC.
Choose the graphics card from benchmarks at your settings
For detailed single-player games, the graphics card should get the biggest share of the parts budget. The performance figures below come from Tom's Hardware's graphics card testing, which averages 19 games at native 1440p on High or Ultra settings, eight of them with ray tracing on. The prices are the lowest we found at Newegg on November 9, 2026, and you can see today's prices in our PC Builder.
Graphics card | VRAM | Average FPS at 1440p | Newegg price, Nov. 91 |
|---|---|---|---|
Radeon RX 9060 XT 16GB | 16GB | 49 | $750 |
GeForce RTX 5070 | 12GB | 74 | $9102 |
Radeon RX 9070 | 16GB | 75 | $7503 |
Radeon RX 9070 XT | 16GB | 85 | $970 |
At those prices, the RX 9070 is the card to buy. It's nearly tied with the RTX 5070 at native 1440p for $160 less, and it costs the same as the RX 9060 XT 16GB while running about 50% faster. If the budget allows, the RX 9070 XT is the step up: about 13% faster than the RX 9070 for $220 more. It's also about 15% faster than the RTX 5070, and TechSpot's 52-game testing put that gap closer to 25%. Those averages include the ray-traced games, so expect higher numbers across the board with ray tracing off.
The RTX 5070 is hard to recommend at $910. It costs $160 more than the RX 9070 for about the same speed and 4GB less VRAM. What the extra money buys is Nvidia's DLSS upscaling, which Tom's Hardware rates ahead of AMD's FSR 4 for image quality and which works in more games. The RX 9060 XT 16GB is harder still to justify at $750 while an RX 9070 costs the same. It's about a third slower, so it's the tier where you're likely to need upscaling or lower settings in the most demanding games.
One caution: that $750 RX 9070 is a single model, the ASRock Challenger, and it has come and gone from our Newegg data this month. Every other RX 9070 we track cost at least $935, which is more than the RTX 5070. If you can't find an RX 9070 for less than an RTX 5070, the two are close. Pick the RTX 5070 for DLSS, or the RX 9070 for the extra VRAM.
Keep an eye on how any FPS figure was produced. The table above is native 1440p, but plenty of benchmarks and a lot of GPU marketing use upscaling or frame generation, and those numbers don't mean the same thing. Upscaling renders the game at a lower resolution and rebuilds the image for your screen, which can help a card that struggles at native 1440p. Frame generation inserts extra frames between the ones the game actually renders, so the FPS counter goes up without the controls feeling equally more responsive. If a result uses either one, ask yourself whether you'd turn it on too.
All three Radeon cards in the table have 16GB of VRAM, the card's own memory for textures and other rendering data, against the RTX 5070's 12GB. That extra room matters most at 4K and with heavy ray tracing. At 1440p, 12GB is usually less of a limitation. Some cards come in more than one capacity, though. The RX 9060 XT is also sold in an 8GB version, and the numbers above are for the 16GB model.
When a faster CPU is worth it
A more expensive CPU pays off when you're chasing high frame rates in competitive games or playing demanding simulations, and the processor is what's holding performance back. If the graphics card is already the limit at your settings, the extra CPU money buys very little.
TechSpot's CPU and GPU scaling test shows both sides of this. It paired the Ryzen 7 9800X3D and the cheaper Ryzen 5 7600X with several graphics cards across four games. With an RX 9070 at 1440p Medium, the 9800X3D was only about 7% faster on average. In Space Marine 2, a CPU-heavy game, the gap at 1440p Ultra reached about 37%, but only with an RTX 5090, a card far outside this budget. With an RX 9060 XT 16GB, the two CPUs performed about the same, because the graphics card was the limit in that case.
That gap in performance is small next to the gap in price. At Newegg on November 9, the Ryzen 5 7600X was $199 and the 9600X started at about $175, while the 9800X3D was $470.1 A six-core chip in that class is a sensible pairing for any card in the table if you mostly play single-player games. Consider stepping up if you play competitive shooters on a high-refresh monitor or CPU-heavy simulations, and try your pairing in our CPU & GPU Bottleneck Calculator before benchmarks of your own games make the final call.
Buy the motherboard connections you'll use
Pick the motherboard after the CPU, since the processor determines the socket and memory type. All three CPUs above use AMD's AM5 socket and DDR5 memory.
For an AM5 build, compare B650 and B850 boards by what you'll actually plug into them. Wi-Fi is worth having if you can't run an Ethernet cable to your desk. Count the USB ports you need, and look for a spare M.2 slot if you expect to add another SSD later. Those features can justify a pricier board, but only because you'll actually use them.
Before you buy, look up the board on the manufacturer's CPU support list. A board built before your CPU came out might need a newer BIOS (the startup software that runs before Windows) to recognize it, even though the socket matches. Some boards can update the BIOS from a USB drive with no supported CPU installed, which gets you around that problem. If you're counting on that feature, confirm your board has it and follow the manufacturer's instructions.
RAM and storage: where 2026 prices bite
The cheapest 32GB kit of DDR5-6000 at Newegg was $4801 on November 9, and the cheapest 16GB kit we found was $260.4 Prices are still climbing: across the 29 kits of 32GB DDR5-6000 we've tracked at Newegg since late September, the median price is up about 5%.5 A comparable kit sold for roughly $100 to $200 in October 2025, according to Tom's Hardware's RAM price index. At $220 more, 32GB is a bigger step up than it used to be, but it's still the better choice for most builds, since it leaves room for the game, voice chat, and a browser full of tabs.
If that $220 is what breaks the budget, 16GB is a workable compromise for a lot of games. In PC Gamer's April 2026 tests with an RTX 5070, Cyberpunk 2077 and Hogwarts Legacy ran about the same on 16GB as on 32GB. Some games did need the extra memory. With 32GB, Stalker 2's 1% lows (the slowest moments, which you notice as stutter) were 11% better, and Escape from Tarkov's were 34% better. If you play games like those, keep 32GB and cut somewhere else.
Whichever capacity you choose, ideally buy a matched two-stick kit that's on your motherboard's support list, and install it in the slots the manual specifies, usually slots not next to each other. DDR5-6000 CL30 is a good target on AM5, but compare it with CL36 kits at the same speed, which are often a little cheaper. You'll probably have to switch on the kit's memory profile (EXPO or XMP) in the BIOS to get its advertised speed, but get the PC running at default settings first.
SSD prices are high but have held steady since late September in our Newegg data. On November 9, the cheapest 1TB PCIe 4.0 NVMe drive there was the Kingston NV3 at $159, and the cheapest 2TB was the Patriot P400 Lite at $270.1 That's about $110 to double your space. 1TB is a reasonable start if uninstalling the occasional game bothers you less than that, and keeping an M.2 slot free lets you add a second drive later.
Stick with PCIe 4.0 NVMe for a gaming build. PCIe 5.0 drives cost more, and their extra speed mostly helps with large file transfers, so they're only worth it if your other work involves moving big files around.
Check the case, cooler, and power supply together
These parts have to fit around the CPU, graphics card, and motherboard you've already picked. Before you pay, confirm that:
- The case takes your motherboard size and has room for your graphics card's length and thickness, plus its power cables.
- The cooler can handle your CPU (usually the case except for high-end CPUs), includes the right mounting hardware, fits under the case's side panel, and doesn't collide with the RAM.
- The power supply meets the recommendation for the graphics card model you're buying and has the connectors it needs. Nvidia recommends 650W for an RTX 5070, but RX 9070 XT models vary: Gigabyte recommends 850W for its Gaming OC version, and PowerColor's Red Devil box calls for 900W. Use a separate cable for each 8-pin input on the card when you can, instead of the second plug on a split cable. For an Nvidia card with a 16-pin connector, a power supply with its own 12V-2x6 cable is the cleaner option. Look up reviews of the power supply itself, too, since an 80 Plus badge only rates efficiency.
- The case comes with the fans you plan to use, and the motherboard has connections for those fans and the case's front ports.
Our GPU case fit checker compares a card's length with a case's listed GPU clearance, which makes it a good first check. From there, account for anything else in that space, such as a front radiator, and leave room for the power cables.
Price the whole PC, then decide what to cut
Put every part into the builder before you buy the first one. Here's what that looks like for the $1,500 target from earlier. With Newegg prices from November 9 to 11, a build with a Ryzen 5 9600X, an RX 9070, a B850 board, 32GB of DDR5, a 1TB SSD, a 750W power supply, a case, and an air cooler came to about $1,820.6 That total uses budget picks for the case and cooler, so plan on roughly $25 more for a tower cooler and a case with intake fans. Dropping to 16GB of RAM brought it to about $1,600. Getting under $1,500 also meant an 8GB graphics card, such as the RTX 5060 Ti 8GB, which gives up the VRAM headroom described above. Cheaper 16GB cards didn't solve it. The RX 9060 XT 16GB cost the same $750 as the RX 9070, and the cheapest RTX 5060 Ti 16GB we track was $800.1 So at current prices, a $1,500 limit means either raising the budget or accepting less memory and less VRAM.
If your total comes out too high, start with the extras you'll miss least, like RGB lighting or motherboard features you won't use. After that, the usual savings each have a known cost: 1TB instead of 2TB means managing space, and 16GB of RAM instead of 32GB works for many games depending on what you play, but may limit multitasking or the ability to keep things like Discord or Chrome open at the same time. Keep the graphics card that meets your target unless you're willing to lower the settings or frame rate you're aiming for, since that's the part the rest of the build was planned around.
Waiting for prices to fall isn't a reliable plan right now. Comparing the last week of September with the first week of November, the price of every RX 9070 and RX 9070 XT model we track at Newegg went up, by $50 to $280.7 Tom's Hardware sees no new graphics card launches on the horizon, and AMD is reportedly raising what it charges card makers for Radeon chips and memory again this month. Holiday sales are worth checking, but judge a deal against the prices above rather than the crossed-out list price.
When you're ready, recheck the models and the seller's final prices, and buy everything close enough together that you can build and test the PC inside the return windows. A discounted part isn't much of a deal if you can't find out whether it works until months later.
Notes
PC Launchpad pricing data. The lowest in-stock price for a new item, before shipping and tax, among the Newegg listings we track through Newegg's affiliate product feed on November 9, 2026. That includes Newegg Marketplace sellers. Each price quoted here also came with free shipping that day. Newegg may sell models we don't track, and other stores may charge less. More on how we check prices.
Back to citation 1Back to citation 2Back to citation 3Back to citation 4Back to citation 5None of the RTX 5070 listings we track appeared in our Newegg feed on November 9, so this price comes from a check of newegg.com that day. It's for the Gigabyte WindForce RTX 5070.
Back to citation 1The ASRock Challenger RX 9070, the cheapest RX 9070 we track, was missing from our Newegg feed on November 9. It was $749.99 in the feed on November 7, 10, and 11, so we've used that price. The cheapest RX 9070 that was in the feed on November 9 was the Gigabyte Gaming OC at $934.99.
Back to citation 1The 16GB DDR5-6000 kits in our Newegg data are all Kingston models, and the cheapest was $369.99 on November 9. Newegg sells cheaper kits that we don't track yet, so this price comes from a check of newegg.com on November 11. It's for the Patriot Viper Venom 16GB (2 × 8GB) DDR5-6000 CL36.
Back to citation 1PC Launchpad pricing data. The change in each kit's weekly median price at Newegg between the week of September 28 and the week of November 2, 2026, for the 29 kits with data in both weeks. Our Newegg price tracking starts in late September 2026.
Back to citation 1Newegg prices on November 9, 2026, from PC Launchpad pricing data: AMD Ryzen 5 9600X ($172.55), ASRock Challenger Radeon RX 9070 ($749.99), ASRock B850M Pro RS WiFi White ($119.99), Patriot Viper Venom RGB 32GB DDR5-6000 CL36 ($479.99), Kingston NV3 1TB ($158.55), Thermaltake Toughpower GF1 750W ($74.99), Thermaltake Versa H17 ($49.99), and Arctic Alpine 23 ($11.99), for $1,818.04. The RX 9070 price comes from our Newegg feed on November 7, 10, and 11, because that listing was missing on November 9. Without the Challenger, the cheapest RX 9070 that day ($934.99) brings the 32GB build to $2,003.04. The RGB kit was simply the cheapest 32GB DDR5-6000 kit we track, so skipping RGB doesn't lower this total. The 16GB RAM version uses the Patriot Viper Venom 16GB DDR5-6000 CL36 ($259.99, from a check of newegg.com on November 11), for $1,598.04. The sub-$1,500 version also swaps in the cheapest RTX 5060 Ti 8GB we track ($529.99), for $1,378.04.
Back to citation 1PC Launchpad pricing data. Weekly median of the lowest daily price we recorded at Newegg in the weeks of September 28 and November 2, 2026, for seven models: the ASRock Challenger, ASUS Prime OC, and Gigabyte Gaming OC RX 9070, and the Gigabyte Gaming OC, PowerColor Reaper, Sapphire Nitro+, and Sapphire Pulse RX 9070 XT. The ASRock Challenger was missing from two of the seven daily feeds in the week of November 2.
Back to citation 1